Best Pulse Oximeter Modules

Here, we reviewed top 10 Best Pulse Oximeter Modules in the market today. We did in-depth research and listed best one below. In case, if you’re in hurry this is the Best Pulse Oximeter Modules on Amazon

We spent 26 hours to find a best option for you and it’s a Pulse Oximeter Pulse Oximeter, which comes with all amazing features you ever want. It is the Best Pulse Oximeter Modules available in the market today. However, if you don’t want to spend big amount on Pulse Oximeter Modules, then you should go with Pulse Oximeter Fingertip Blood which comes with all the basic options you could ever expect in Pulse Oximeter Modules.

After a lots of research, we have sorted this list of Best Pulse Oximeter Modules to help you.

10 Best Pulse Oximeter Modules In

PRODUCT RATING PRICE
1 1 Pulse Oximeter Pulse Oximeter
  • 10
Check On Amazon
2 2 Pulse Oximeter Fingertip Blood
  • 9.2
Check On Amazon
3 3 Metene Pulse Oximeter Fingertip
  • 8.8
Check On Amazon
4 4 Pulse Oximeter Fingertip Blood
  • 8.6
Check On Amazon
5 5 MakerFocus Heart-Rate Sensor Module
  • 8.2
Check On Amazon
6 6 Pulse Oximeter Fingertip ANKOVO
  • 8.0
Check On Amazon
7 7 Pulse Oximeter Fingertip Portable
  • 7.2
Check On Amazon
8 8 CONTEC LED CMS50M Pulse
  • 7.2
Check On Amazon
9 9 Flexzion Pulse Oximeter CMS-50DL
  • 6.6
Check On Amazon
10 10 KOOBOOK 2Pcs MAX30102 Oximeter
  • 5.0
Check On Amazon

Top 10 Pulse Oximeter Modules

Below, we wrote detailed review about top 10 Pulse Oximeter Modules so, please check out and make a wise choise.

1. Pulse Oximeter Pulse Oximeter

The pulse oximeter fingertip is simple to use, low power consumption, small size, light weight, easy to carry.

  • Determine your SPO2 and Pulse Rate in 10 seconds or less displayed on its large digital red LED display.
  • SPORT/HEALTH ENTHUSIASTS – For sports enthusiasts like mountain climbers, skiers, bikers or any sports enthusiasts interested in measuring their SPO2 and pulse rate.
  • Included: Pulse oximeter, Lanyard, User manual. 2 AAA Batteries are not included.
  • NOTE: This device is for Sports & Aviation use only and is not a medical device.
  • 2. Pulse Oximeter Fingertip Blood

    Pulse Oximeter Fingertip for Measure Pulse Rate and SpO2 Level, for Sports or Aviation Use OnlyWhy You Need a Pulse Oxygen Finger Monitor:Many times we are in a state of hypoxia without knowing it, we often have some manifestations of hypoxia, but often feel we have other problems, rather than think that we are hypoxic, but long-term hypoxia will cause serious harm to the human body.

  • WIDE APPLICATION – For sports enthusiasts like mountain climbers, skiers, bikers or any people interested in measuring their SPO2 and pulse rate. The oximeter is intended use for check of blood oxygen saturation level for sports or aviation use. You should remain stationary while the pulse oximeter measure your pulse rate and SpO2.
  • EXQUISITE APPEARANCE – Small size, does not take up space, easy to carry, can be hung on the body, can also be packed in pockets.
  • LOW POWER CONSUMPTION – The oximeter need 2 AAA batteries, not included in the package can be operated continuously for more than 30 hours. Also, the oximeter will power off automatically when no signal is in the product within 5 seconds.
  • YOU WILL GET – 1* Pulse Oximeter, 1* Lanyard, 1* User Manual and 1 year warranty. Note: This device is for sports and aviation use only. This is not for medical use.
  • 3. Metene Pulse Oximeter Fingertip

  • 【For Sports and Aviation Use Only 】: Suitable for sports enthusiasts and aviation use only , accommodates wide range of finger sizes – children to adult.
  • 【User Friendly Design】: High quality transparent acrylic panel. The oxygen meter body is elaborately made of ABS material, very exquisite and compact. One button operation and shut down automatically without operation in 8 seconds. Large LED and backlight display make it very easy to read.
  • 【Lightweight & Portable】: Metene fingertip pulse meter very light and easy to carry.This spo2 monitor is attached with detachable lanyard convenient to measure your oxygen saturation anywhere.
  • 【You Will Get】:1*pulse oximeter, Lanyard, 2*AAA Batteries, 1*User Manual and 1* worry-free after-sale service. Please feel free to contact us if any quality issue within 12 months after the day of purchasing, we will reach back as soon as possible and try our best to make you satisfied.
  • 4. Pulse Oximeter Fingertip Blood

    Features: 1.

  • ♥【EASY TO USE】: This oximeter finger with pulse designed with One button control which makes measurement more convenient and easier. The finger pulse oximeter will shut down automatically without operation in 8 seconds. ABS material, the fingertip clip use silica gel material which are soft and easy to apply.
  • ♥【LIGHTWEIGHT & PORTABLE】ANKOVO oxygen saturation monitor are very light and small size, low power consumption and convenient in carrying. Also it comes with a detachable lanyard which can measure your oxygen saturation anywhere.
  • ♥【SPORT ENTHUSIASTS】: Suitable for mountain climbers, skiers, bikers, aviators or anyone interested in measuring their SpO2 and pulse rate while on the move. You should only use the pulse ox before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse rate and SpO2 levels.
  • ♥【WHAT YOU WILL GET】: You will get 1* finger pulse oximeter, 1* lanyard, 1*user manual , 2*AAA batteries and one year worry-free after-sale service. If any quality issues within 12 months, please contact us in your free time and we will try our best to make you satisfied. This device is for sports and aviation use only.
  • 5. MakerFocus Heart-Rate Sensor Module

    Heart-Rate Sensor Module, MAX30102 Blood Oxygen Sensor, Compatible with Arduino STM32Parameters:LED peak wavelength: 660nm/880nmLED power supply voltage: 3.

  • MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression.
  • MAX30102 uses a 1.8V power supply and an independent 5.0V power supply for internal LED. It is used in wearable equipment for heart rate and blood oxygen acquisition and detection. It is worn on fingers, earlobes and wrists.
  • The standard I2C compatible communication interface can transmit the collected data to Arduino, KL25Z and other microcontrollers for heart rate and blood oxygen calculation;In addition, the chip can turn off the module by software, and the standby current is close to zero, so that the power supply can always maintain the power supply state. Because of its excellent performance.
  • The chip has been widely used in some mobile phones of some brands. Compared with the previous product MAX30100 , MAX30102 integrated glass cover, which can effectively eliminate external and internal light interference, with the best reliable performance.
  • 6. Pulse Oximeter Fingertip ANKOVO

    ANKOVO Finger Pulse Oximeter reads accurate oxygen saturation and pulse rate, it is perfect for exercise enthusiasts, athletes, and those who need to monitor their blood oxygen circulation and heart rate.

  • 【NEW SOFTWARE FEATURES 】 1) The function of oxygen monitor that tells you if you are taking your SpO2 and Pulse Rate properly. 2) Automatic shut-down, this pusle oximeter will turn into sleep mode within 8 seconds after there is no signal. 3) Low power consumption, battery-low indicator.
  • 【SPORT/HEALTH ENTHUSIASTS】 The blood oxygen meter finger is suitable for sports enthusiasts, like mountain climbers, skiers, bikers, aviators, or anyone interested in using finger pulse oximeter to measure their SpO2 and pulse rate while on the move. You can use O2 monitor finger for oxygen before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse and SpO2.
  • 【EASY TO OPERATE】 The fingertip pulse oximeter is simple operation with one button which can be easy to take a reading and monitor will automatically power off after 8 seconds.
  • 【ACCESSORIES & WARRANTY】 Light weight and small size with a lanyard for convenience and include 2 AAA batteries. Professional after-sale service and comes with 12 months after-sale service.
  • 7. Pulse Oximeter Fingertip Portable

    The Product Features of Pulse Oximeter This finger pulse oximeter is designed for people who want to know their SpO2 (Blood Oxygen Saturation Levels) and pluse rate.

  • 【ACCURATE AND FAST】This oxygen monitor can accurately determine your SpO2 (blood oxygen saturation levels), heart rate and pulse strength in 8 seconds and display it conveniently on a large digital LCD display.
  • 【SPORT ENTHUSIASTS】Suitable for mountain climbers, skiers, bikers, aviators or anyone interested in measuring their SpO2 and pulse rate while on the move. You should only use the pulse ox before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse rate and SpO2 levels.
  • 【Lightweight and Easy to Carry】 The product is light-weight and compact, the fingertip clip use soft silica gel mairal and come with a lanyard, you can easy to take to the gym and office.
  • 【What You Will Get】 1* Fingertip oximeter; 2 *AAA Batteries; 1* Lanyard;1*User manual and 6 months replacement from the date of purchase.
  • 8. CONTEC LED CMS50M Pulse

  • 2.User can see Pulse Rat,bar graph in this LED display
  • 3. Light and compact, you only need to put your finger in the fingertip pulse oximeter testing chamber, the result will be shown
  • 4.The contec product’s housing use ABS matiral,the fingertip clip use silica gel mairal,is soft and easy to apply
  • 5.NOTE: this product is intended for sports and aviation use only and is not a medical device.We are the direct manufacturer, there is a clear screen protector which can be removed before use.
  • 9. Flexzion Pulse Oximeter CMS-50DL

    Pulse oximetry is a noninvasive method for monitoring a person’s oxygen saturation (SO2).

  • Easy and convenient one button operation, adjustable brightness for both indoor and outdoor environment and spotr exercise
  • digital LED display with low power consumption can provide up to 40 hours of continuous readings; Automatic power off after inactivity
  • For sports and/or aviation use only, it can be used by a variety of sports enthusiasts, athletes, including others interested in measuring oxygen saturation and pulse rate
  • Compact and lightweight, convenient to carry with a free carrying case and strap, reliable and durable
  • 10. KOOBOOK 2Pcs MAX30102 Oximeter

    Specifications: Heart-Rate Monitor and Pulse Oximeter Sensor in LED Reflective Solution Tiny 5.

  • It includes internal LEDs,photodetectors, optical elements, and low-noise electronics,with ambient light rejection.
  • The MAX30102 operates on a single 1.8V power supply,and a separate 5.0V power supply for the internal LEDs.
  • Communication is through a standard I 2 C-compatible interface.
  • The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.For mobile and wearable devices.
  • So, this is our review on Best Pulse Oximeter Modules to help you out. For more product reviews check out below or visit here.